Portable Mounts

19 products
Sort by
Sort by
A PIVOT Single Suction Cup Mount with a square white attachment at the end of a flexible arm is shown. The mount has a suction cup base for securing it to surfaces. The central portion of the attachment has the text "PIVOT" engraved on it. A PIVOT Single Suction Cup Mount with brand name "PIVOT" on the square attachment surface. The mount has adjustable joints and attaches to surfaces using the suction cup at the end.
Single Suction Cup Mount

For all PIVOT cases, past, present, and future
$48.95
The PIVOT Claw Mount is a black adjustable clamp mount with a gray swivel head attached to a white pole. The swivel head is designed to hold and position a small device or accessory. The mount has a sturdy, industrial design with visible screws and joints for flexibility and secure attachment. A black adjustable Claw Mount with a rectangular holder is attached to a white cylindrical pole. The holder is labeled "PIVOT." The setup is designed to hold devices like smartphones or cameras securely in place.
Claw Mount

Small Claw Fits:
Cessna
Piper*
Mooney

Medium Claw Fits:
Beechcraft
Piper*

*Some older Piper models use thicker yoke rods and require the Medium Claw. If you are unsure which size Claw is most appropriate for your application, please measure yoke rod before ordering.
$59.95
A black adjustable Articulating Claw Mount - NEW, branded with "PIVOT," is securely clamped to a cylindrical metal bar. The mount features several adjustable joints and knobs, allowing for customized positioning of attached devices or accessories. A black PIVOT Articulating Claw Mount - NEW attached to a cylindrical bar. The holder has an adjustable arm with several joints, a clamp mechanism, and a square magnetic mount at the top labeled "PIVOT." The bar is orientated horizontally.
Articulating Claw Mount

For All PIVOT EFB cases, past, present, and future
$64.95
A black PIVOT Low Profile Single Suction Cup Mount with a suction cup base and adjustable arm. The mount has a square magnetic holder at the top. The base and arm are connected by a rotating joint, allowing for various positioning angles. A close-up of the PIVOT Low Profile Single Suction Cup Mount with an adjustable arm and a square magnetic holder. The mount features various hinges and joints for customizable positioning. The design is sleek and modern with a mix of matte and glossy finishes.
Low Profile Single Suction Cup Mount

For all PIVOT cases, past, present, and future
$48.95
Shorty Single Suction Cup Mount Shorty Single Suction Cup Mount
Shorty Single Suction Cup Mount

For all PIVOT cases, past, present, and future
$48.95
Multi-Purpose Flex Mount Multi-Purpose Flex Mount
Multi-Purpose Flex Mount

For all PIVOT cases, past, present, and future
From $59.95
Double Suction Cup Mount - 1-inch Ball Arm The image shows a PIVOT Double Suction Cup Mount - 1-inch Ball Arm, typically used for attaching devices to surfaces like windshields or dashboards. It has two large suction cups connected by a black, adjustable arm with multiple hinges and a mounting plate on one end.
Double Suction Cup Mount - 1-inch Ball Arm

For all PIVOT cases, past, present, and future
$149.95
A black, dual-suction mount phone holder with adjustable arms and pivot points. The holder features a rectangular attachment area with rounded corners and is labeled "PIVOT." The Double Suction Cup Mount - 0.75-inch Ball Arm is designed to adhere to smooth surfaces like car windshields or dashboards. A Double Suction Cup Mount - 0.75-inch Ball Arm with an adjustable arm and a square base that reads "PIVOT" over a white background. The mount features twist locks on each suction cup to secure their position and an adjustable mechanism for the base.
Double Suction Cup Mount - 0.75-inch Ball Arm

For all PIVOT cases, past, present, and future
$119.95
A black and silver PIVOT Yoke Clamp Mount designed to secure a device on handlebars. Features an adjustable clamp, a square-shaped holder with multiple grips, and a sturdy base. The clamp accommodates handlebar sizes ranging from 51 to 76 mm. An adjustable black handlebar mount with a swivel joint, holding a square-shaped device marked "PIVOT." The PIVOT Yoke Clamp Mount by PIVOT is securely clamped onto a cylindrical black bar. The design allows for flexible positioning of the attached device.
Yoke Clamp Mount

Small Clamp
Aircraft Yoke Rods 1.0-2.1 inches (25.4-53.3 mm) in diameter

Large Clamp
Yoke rods 2.0-3.0 inches (50.8-76.2 mm) in diameter

Electronic Flight Bag (EFB) Cases
For all PIVOT cases, past, present and future
$49.95
Heavy Duty Velcro® Mount Heavy Duty Velcro® Mount
Heavy Duty Velcro® Mount

For all PIVOT EFB cases, past, present, and future
$24.95
PortaGrip Phone Mount PortaGrip Phone Mount
PortaGrip Phone Mount

For most phones
$49.95
A black Desktop Mount with a circular base, adjustable arm, and a square holder labeled "PIVOT." The device appears to be designed for securing equipment or cameras, featuring a locking mechanism and adjustable ball joint for varied positioning. Desktop Mount
Desktop Mount

For all PIVOT cases, past, present, and future
$89.95
UniFlex Hard Mount UniFlex Hard Mount
UniFlex Hard Mount

For all PIVOT cases, past, present, and future
From $37.95
Low Profile Suction Cup / Camera Mount Low Profile Suction Cup / Camera Mount
Low Profile Suction Cup / Camera Mount

For any camera with standard tripod mounting threads
$19.95
Arm Extender for 809 Suction Cup Arm Extender for 809 Suction Cup
Arm Extender for 809 Suction Cup

For the 809-series Suction Cup Mounts and the PIVOT Desktop Mount
$11.95
Suction Cup Mount for Stratus Suction Cup Mount for Stratus
Suction Cup Mount for Stratus

For Stratus 3i, Stratus 3, Stratus 2i, Stratus 2S, Stratus 2,
Stratus 1S
$55.95
Single Suction Cup Bundle
$43.95
Small Claw Mount Bundle
$53.95
Low Profile Single Suction Cup Mount Bundle
$39.95